Skip to main content
0800 110 301
Azraa EV logoAzraa
Explained

What Is Regenerative Braking Level and How Do You Adjust It?

By the Azraa EV team··9 min read
evbrakinghow-to

Most EVs sold in NZ let you choose how aggressively the car slows down when you lift off the accelerator, and getting this setting right makes a genuine difference to both comfort and how much energy you recover.

Get an instant price for this

Most EVs sold in NZ let you choose how aggressively the car slows down when you lift off the accelerator, and getting this setting right makes a genuine difference to both comfort and how much energy you recover. Here's what regenerative braking levels actually control and how to adjust them on the models we see most often.

What a Regen Level Actually Controls

Regenerative braking uses the electric motor as a generator when you lift off the accelerator, converting the car's momentum back into electricity and sending it to the battery, while simultaneously slowing the car down without you touching the brake pedal. The "level" setting adjusts how strongly this happens — a low level lets the car coast with only gentle deceleration, similar to lifting off in a petrol automatic, while a high level produces noticeably firm deceleration, closer to gently applying the brake pedal.

This is a genuinely different thing from the "one-pedal driving" feature offered on some models, which is a separate, distinct mode that allows the strongest regen setting to bring the car to a complete stop. Regen levels, by contrast, exist on a sliding scale and on most cars still require the brake pedal to bring you fully to a stop, even at the highest setting.

How to Adjust It on Common NZ Models

Hyundai and Kia models (IONIQ 5, EV6, Kona Electric, Niro EV): Use the paddle shifters behind the steering wheel — the left paddle increases regen strength, the right paddle decreases it, typically across four levels from off through to the strongest "i-Pedal" setting that allows a full stop. The car remembers your last setting between drives.

Nissan Leaf: A dedicated "e-Pedal" button on the centre console toggles between standard regen and the stronger one-pedal-capable mode. There isn't a granular multi-level adjustment — it's essentially an on/off toggle between two distinct behaviours.

Tesla Model 3/Y: Regen strength itself isn't separately adjustable on recent software, but "Stopping Mode" can be set to Creep, Roll, or Hold, which changes how the car behaves at very low speed and whether it comes to a complete, held stop.

MG4 and BYD Atto 3: Menu-based adjustment through the touchscreen, typically offering low, medium, and high regen settings, sometimes labelled as KERS (Kinetic Energy Recovery System) strength.

Choosing the Right Level for the Situation

  • Motorway driving: A lower regen level tends to feel more natural, since you're mostly maintaining speed rather than constantly slowing down, and excessive regen on the motorway can feel like unwanted engine braking
  • Stop-start city and suburban driving: A higher regen level lets you do most of your slowing down without touching the brake pedal, which is both more relaxing in traffic and recovers meaningfully more energy over a typical commute
  • Towing or carrying a heavy load: A moderate setting avoids abrupt deceleration that can unsettle a loaded trailer, while still giving you useful engine-braking-like control on descents
  • Wet or icy conditions: Very high regen settings can occasionally contribute to rear-wheel slip on a slippery surface, particularly on rear- or all-wheel-drive EVs, so easing off a level in genuinely poor conditions is sensible

Does a Higher Regen Level Save You Money?

Yes, though the effect is smaller than most owners expect. In typical NZ commuting conditions, running a higher regen setting rather than a low one tends to improve real-world efficiency by roughly 3–7%, mostly from capturing energy during braking events that would otherwise be lost as heat in conventional friction brakes. The bigger saving is actually on brake pad wear — EV owners running high regen settings consistently report brake pads lasting well beyond 100,000 km, since the friction brakes are doing a fraction of the work they would in a petrol car.

Common Mistakes Owners Make

  • Leaving it on the lowest setting out of habit from a petrol car, then wondering why efficiency and range seem to underperform the advertised figures
  • Jumping straight to the highest setting without adjusting driving style, which can feel abrupt and uncomfortable for passengers until you learn to lift off earlier and more gradually
  • Not realising the setting can be changed at all, particularly on cars where the control is a menu option rather than a physical paddle or button

Why Regen Strength Sometimes Feels Weaker Than Usual

If your car's regen suddenly feels noticeably weaker than normal, particularly on a cold morning or when the battery is at or near 100% charge, that's usually the battery management system limiting regen intentionally rather than a fault. A very cold battery has reduced ability to accept charge quickly, and a nearly full battery simply has little spare capacity left to absorb the energy regen would otherwise send back in — in both cases the car falls back more heavily on the conventional friction brakes to make up the difference, and full regen strength returns once the battery has warmed up or been driven down from a full charge.

The Bottom Line

Regen level is one of the easiest EV settings to get wrong simply by never touching it, and one of the easiest to get right once you understand what it's doing. Matching a higher setting to city driving and a gentler one to the motorway, and adjusting further for towing or slippery conditions, is a five-second habit that pays off in both efficiency and brake longevity over the life of the car.

Need help with your hybrid or EV?

Get an instant price estimate for battery replacement, diagnostics, or parts.

Get a quote — 60 seconds
Get a quote — 60 seconds