"Why is my car only charging at 7kW when the charger says it can do 22kW?
Get an instant price for this"Why is my car only charging at 7kW when the charger says it can do 22kW?" is one of the most common questions we get from new EV owners, and the answer touches on a handful of overlapping factors that are worth understanding once, properly, rather than half-explained forever.
kW versus kWh — the distinction that trips everyone up
kW, kilowatts, is a rate: how fast energy is flowing at any given moment. kWh, kilowatt-hours, is a quantity: the total energy delivered over time. A 7kW charger running for one hour delivers 7kWh. The same charger running for three hours delivers 21kWh. Your battery's size is measured in kWh (a 64kWh battery holds 64kWh when full); how quickly you fill it depends on the kW rate available at each point in the session.
What actually limits your charging speed
Three separate ceilings stack on top of each other, and your actual charging speed at any moment is set by whichever is lowest:
- The charger's maximum output — a home wallbox might be rated 7kW or 22kW; a public DC unit might be 50kW, 150kW, or 300kW+.
- Your car's onboard charger limit for AC charging — most EVs cap their onboard AC charger at 7.2–7.4kW for single-phase homes, regardless of how powerful the wallbox is. A small number of models support three-phase AC charging up to 11kW or 22kW, but only if your house has a three-phase supply, which most standard NZ residential connections don't.
- The battery's own acceptance rate, which varies with state of charge and temperature.
This is why plugging a car with a 7.4kW onboard charger into a 22kW public AC charger still only delivers 7.4kW — the car, not the charger, is the bottleneck.
AC versus DC — different limiting factors entirely
AC charging runs through your car's onboard charger, which converts AC to DC before it reaches the battery; this conversion hardware is what caps AC speed, typically at 7.4–11kW depending on the model. DC fast charging skips the onboard charger entirely, delivering DC current straight to the battery, which is why DC charging can reach far higher speeds, 50kW to 350kW+ depending on the car and charger.
The charging curve — why speed isn't constant
Charging speed isn't flat across a session. From around 10% to 55–60% state of charge, most EVs accept close to their maximum rate. Past that point, the battery management system tapers the rate down to protect the cells, often to a third or less of peak speed by 90%, and slower again approaching 100%. This is a deliberate protective measure, not a fault; lithium-ion cells are more sensitive to stress at higher states of charge.
Temperature's effect on speed
Cold batteries accept charge more slowly — chemistry, not a limitation of the charger. On a frosty morning, a battery sitting around 4°C might charge at half its rated DC speed until it warms up, typically ten to twenty minutes into the session. Preconditioning the battery beforehand, which many EVs do automatically when a fast charger is set as a navigation destination, reduces this effect noticeably.
A worked example
A 78kWh battery EV with a 7.4kW onboard AC charger, charging from 20% to 100% (roughly 61kWh) at home, takes close to eight and a half hours at a steady rate. The same 61kWh added via a 110kW DC fast charger might take under 40 minutes for the bulk of it, but the last 10–15% could add another 15–20 minutes on its own due to the tapering curve — the last stretch of any charge is almost always the slowest, proportionally.
Why "kW rating" on a charger is only half the story
A public charger advertised at 300kW is sharing that capacity across multiple bays at busy sites, and your car still needs the onboard hardware and battery temperature to actually use it. Two drivers plugged into the same 300kW unit, one in a car capped at 100kW and one capped at 230kW, will see very different session times even at the identical charger.
The bottom line
Charging speed is really the interaction of three things: what the charger can output, what your car's hardware can accept, and what your battery's chemistry allows at that moment, and the slowest of the three always wins. Understanding this makes public charger ratings much easier to interpret, and explains why two identical-looking chargers can deliver very different real-world results depending on what's plugged into them.
Need help with your hybrid or EV?
Get an instant price estimate for battery replacement, diagnostics, or parts.
Get a quote — 60 seconds