Skip to main content
0800 110 301
Azraa EV logoAzraa
Charging

EV Charger Firmware Updates: Why Your Home Charger Needs Them Too

By the Azraa EV team··8 min read
evchargingmaintenance

Most EV owners think about firmware updates only in the context of their car — the over-the-air updates Tesla, Hyundai, and others push to improve range calculations or fix bugs.

Get an instant price for this

Most EV owners think about firmware updates only in the context of their car — the over-the-air updates Tesla, Hyundai, and others push to improve range calculations or fix bugs. Far fewer think about the fact that the charger sitting on their garage wall runs its own software too, and that keeping it updated matters more than it seems.

Your home charger is a small computer, not just a cable

A modern home EV charger — a Zappi, Wallbox, EO, or similar smart unit — isn't a dumb power switch. It runs embedded software that manages charge scheduling, communicates with your car's onboard charger to negotiate charge rate, connects to your home wifi or a mobile app for monitoring, and in some cases integrates with solar diversion or time-of-use electricity plans to shift charging to cheaper overnight rates. All of that functionality depends on firmware that, like any connected device, occasionally needs updating to fix bugs, patch security vulnerabilities, or add compatibility with newer EV models as they arrive in NZ.

Why outdated firmware causes real problems

We've seen a handful of NZ customers bring in charging complaints — slow charge rates, chargers failing to start a session, or scheduling features simply not working — that turned out to be outdated firmware rather than a hardware fault or wiring issue. New EV models sometimes require updated charger firmware to negotiate charging correctly, particularly around communication protocols for charge rate limiting; a charger running two-year-old firmware may simply not know how to talk properly to a car released last year. This is a genuinely common and easily missed cause of "my new EV charges slower on my home charger than it should" complaints.

Security is a real, not theoretical, concern

A wifi-connected charger is a device on your home network with access to your electricity usage data and, in some setups, control over a meaningful electrical load. Outdated firmware on any connected home device is a known security weak point, and charger manufacturers do issue security patches — not just feature updates — for exactly this reason. This isn't a hypothetical NZ-specific risk so much as a general smart-home device risk, but because a charger is a higher-power device than most smart home gadgets, it's worth taking seriously rather than assuming it's "just a charger."

How to check and update your charger's firmware

Most smart chargers sold in NZ update automatically via their companion app whenever they're connected to wifi and powered on, similar to how a smart TV updates itself in the background. It's worth actively checking rather than assuming this is happening silently and correctly:

  • Open the manufacturer's app (myenergi app for Zappi, Wallbox app, etc.) and look for a device or firmware settings section — most show the current firmware version and whether an update is pending.
  • Confirm your charger is actually connected to wifi, not just powered on — a charger installed near the edge of your home wifi range can silently drop offline and stop receiving updates for months without any obvious symptom.
  • Restart the charger periodically (via the app or by isolating power at the switchboard briefly) if an update seems stuck, as some units only apply a downloaded update after a power cycle.
  • Check for updates after buying a new EV, specifically, even if your charger has worked fine with a previous car — new vehicle compatibility is one of the most common reasons for a firmware release.

What if your charger has no app or wifi at all?

Older or budget chargers installed several years ago sometimes have no connectivity at all — they're simple, fixed-rate units with no firmware to speak of. These aren't at security risk in the same way, but they also can't benefit from newer compatibility or scheduling features. If you're finding charge speeds inconsistent with an older non-connected unit, particularly after getting a new EV, it may genuinely be a hardware limitation rather than anything firmware could fix, and it's worth an electrician confirming what your unit actually supports before assuming a software issue.

Budgeting for a charger upgrade if yours can't be updated

If your charger genuinely can't support a firmware path to modern compatibility, replacement with a current smart unit typically costs $1,300–$2,700 installed in NZ depending on capacity and whether your switchboard needs any accompanying work, similar to a first-time install. This is a reasonable one-off cost against years of correctly functioning, schedulable, and up-to-date charging rather than persistent slow-charge frustration.

Bottom line

Treat your home charger like any other connected device in your house — check for and apply firmware updates rather than assuming it happens invisibly and correctly, particularly after getting a new EV. It's a five-minute app check that resolves a surprising share of the "why is my charging slower than it should be" complaints we see, and it matters for security as much as convenience.

Need help with your hybrid or EV?

Get an instant price estimate for battery replacement, diagnostics, or parts.

Get a quote — 60 seconds
Get a quote — 60 seconds